MUGEN

Direct replacement for the OE grille, Shiny black finish, Mold injection, ABS

For all types (FF/4WD)

Shiny black

0.6h 75100-XMK-K0S0

To be attached on the bottom part of the bumper. Two-toned (Body color × matte black)
Vacuum-formed PPE

Crystal black color cannot be selected for Two-toned type of the front under spoiler.

For all types (FF/4WD)

Two-toned (Body color × matte black)

0.6h 71110-XMK-K0S0-※※

Unpainted

0.6h 71110-XMK-K0S0-ZZ

To be attached on the bottom part of the bumper. Monotone (Body color)
Vacuum-formed PPE

For all types (FF/4WD)

Painted

0.6h71110-XMK-K1S0-※※

Unpainted

0.6h 71110-XMK-K0S0-ZZ

Advanced super luminosity LED fog light with a high level of visibility, low power consumption, long life, and is capable of giving an ideal light distribution owing to a combination of a high performance projector unit and a LED.

Attachment kit, sold separately, is required for installation.

08V31-XG8-LW01

LED Fog Light Attachment

A set of a LED fog light attachment and a harness
OE fog light switch is replaced as the switch for MUGEN fog light.

HYBRID·S package (FF)13G·S package (FF/4WD)RS

0.6h 08V31-XMK-K2S0

A set of a LED fog light attachment, a harness, a switch, and a special garnish

HYBRID·F package (FF)HYBRID·L package (FF)

13G·F package (FF/4WD)13G·L package (FF/4WD)

1.2h 08V31-XMK-K0S0

15X (FF/4WD)15X·L package (FF/4WD)

1.0h 08V31-XMK-K1S0

Switch

To be attached on the bottom part of the OE side skirt (In case the side garnish in initially installed, replace it for the MUGEN side spoiler.)
Two-toned (Body color × matte black)※, Vacuum-formed PPE, A set of right and left spoilers

Crystal black color cannot be selected for Two-toned type of the side spoiler.

For all types (FF/4WD)

Two-toned(Body color × matte black)

1.2h 70219-XMK-K0S0-※※

Unpainted

1.2h 70219-XMK-K0S0-ZZ

To be attached on the bottom part of the OE side skirt (In case the side garnish in initially installed, replace it for the MUGEN side spoiler.)
Monotone (Body color)
A set of right and left spoilers

For all types (FF/4WD)

Colored

1.2h 70219-XMK-K1S0-※※

Unpainted

HYBRID·S package (FF)13G·S package (FF/4WD)RS

Two-toned (Body color × matte black)  

1.0h 84111-XMK-K1S0-※※

HYBRID (FF)HYBRID·F package (FF)HYBRID·L package (FF)

13G (FF/4WD)13G·F package (FF/4WD)13G·L package (FF/4WD)

15X (FF/4WD)15X·L package (FF/4WD)

Two-toned (Body color × matte black)  

1.0h 84111-XMK-K0S0-※※

Unpainted

1.0h84111-XMK-K0S0-ZZ

LED rear fog light can add an impression of racing car silhouette to the rear appearance and has high level of visibility even in bad weather. Comes with switch installable on instrument panel

The product can be installed on the MUGEN rear under spoiler installed initially. MUGEN LED fog light can not be installed together with LED rear fog light for HYBRID·F package, 13G·F package, 15X equipped with the halogen light.

1.5h 34400-XMK-K0S0

HYBRID (FF)HYBRID·F package (FF) HYBRID·L package (FF)

Painted

1.2h 84112-XMK-K1S0-※※

13G (FF/4WD)13G·F package (FF/4WD)13G·L package (FF/4WD)

15X (FF/4WD) 15X·L package (FF/4WD)

Painted

1.0h 84112-XMK-K0S0-※※

Unpainted

1.0h 84112-XMK-K0S0-ZZ

With the case of the ordinary visors, when the side window is open even slightly, air emitted from the front opening flows upward along the window and re-enters the passenger compartment. However, the MUGEN visor design has so unique configuration that it prevents the back flow and efficiently uses negative pressure to discharge air from the passenger compartment. Furthermore, wind noise is significantly reduced compared to that generated by many other visor fitments, while at the same time rainwater is prevented from entering the passenger compartment; both factors that provide a substantial improvement in passenger comfort.
Smoked acrylic, 2pcs each of the front and rear visors as a set, PAT

※Under the condition that the top part of the window is positioned higher than that of rubber blade

0.4h72400-XMK-K0S0