MUGEN

Please note; this assist meter is exclusively for use with RHD (Right-hand drive).
High precision additional meters incorporating water temperature gauge, oil temperature gauge, and an oil pressure gauge installed within a meter cowl designed exclusively for FIT. The shape and position of the cowling is designed and arranged so as to require minimum movement from the driver's line of sight. The color of illumination can be selectable, blue or red. The diameter of the meter is φ60. The assist meter comes with a sensor, a control unit, and a switch unit. Meter cowl is finished in matte black.

HYBRID·F package (FF)HYBRID·L package (FF)

HYBRID·S package (FF) 13G·F package (FF/4WD)

13G·L package (FF/4WD) 13G·S package (FF/4WD)

15X (FF/4WD) 15X·L package (FF/4WD)RS

3.0h 78200-XMK-K0S0

[Illumination] With the side lights and head lights switched on, the assist meters are illuminated. The color of the illumination is selectable blue, matching to the color of the OE meters, or sporty red.

[Peak mode] The peak value of each meter during vehicle running is indicated by the respective needle.

[Warning mode] Whenever a reading from the engine sensors exceeds the user pre-set value, the warning LED in the panel board lights up (in case of oil pressure gauge, if the value is less than the set value, then the warning LED lights up). A useful replay mode in which each meter simultaneously records and reproduces the running condition for a maximum of 180 seconds is available.

Semi bucket seat satisfying both high holding performance and lightweight properties　 When developing a semi bucket seat two contradictory requirements need to be addressed, that of ergonomic drive support while at the same time providing driver comfort, including easy-access. MS-Z is specifically designed to reliably hold and support the shoulders, waist, and thighs and hardness of the urethane sections in each area is adjusted optimally. Special non-slip material was also chosen to protect driving posture while encountering strong G-force during cornering. The front area of MS-Z is covered in Alcantara®
Product passing the safety regulations
Alcantara® is a registered trademark of Alcantara S.p.A.

Specifications
Stepless recliner / Forward folding backrest / Lumbar support pad insertion type / Belt holes for safety harness / High grip side support / Long & deep seat cushion / Alcantara® / Shoulder grip / MUGEN Logo (embroidered) Weight of the main body: 15kg

For all types (FF/4WD)  Not mountable on the vehicles with i-side air bag system for the front seat

[Seat main part] 81100-XXG-K0S0

[Seat rail set] MS-Z, RECARO seat rail set
0.8h [Driver's] 81300-XMK-K0S0-D  [Passenger's] 81300-XMK-K0S0-P

Combination with the RECARO seat rails above can also be certificated by Japanese safety standard.
Seat rails above are not available through M-TEC.

MUGEN colors are highlighted on the shoulder grips. Special non-slip material was chosen to protect the driver from slippage	MUGEN logo is embroidered on the back rest area. Red sticking is adopted to express our racing sprit.
Alcantara® was chosen to protect the driver from slippage during cornering. Punched mesh also provides high hear release and heat absorption properties.

The ultimate full bucket seat satisfying both high holding performance and light weight properties. The main structure of the seat is the shell which is designed to hold the driver securely while enduring strong G-force during cornering, and also contributes to weigh saving. Form and thickness of the urethane are modified to fit each part of the body. The front area of the seat is covered in Alcantara® which is known as a high durability material with a pleasant feel and texture. The seat completes with the FIA regulations applied in most renowned races including SUPER GT.
Alcantara® is a registered trademark of Alcantara S.p.A.

Specifications
Carbon fiber shell / Belt holes for 3 inches full harness / Lumber support pad insertion type / Deep side support / Divided seat cushion / Non-slip seat cushion / Alcantara® / Shoulder grip / MUGEN logo (embroidered) / Main body weight: 6.5kg

For all types (FF/4WD) Not mountable on the vehicles with i-side air bag system for the front seat

[Seat main part] 81100-XXF-K0S0

For installation seat rails are required. RECARO seat rails (Driver's:2085.003.2 Passenger's:2085.003.1) and side adopter (1700000J) can also be used.

[Seat rail set] 1.0h
MS-R, RECARO seat rail and side adopter set

[Driver's] 81500-XMK-K0S0-D  [Passenger's] 81500-XMK-K0S0-P

Combination with the RECARO seat rails above can also be certificated by Japanese safety standard.
Seat rails above are not available through M-TEC.

MUGEN colors are highlighted on the shoulder grips. Special non-slip material was chosen to protect the driver from slippage.	Form and thickness of the urethane are modified to fit each part of the body, which maximizes contact area and in the end leads to high driver-support performance and fatigue reduction effect.
Alcantara® material was chosen to help prevent the driver from slipping during cornering. Punched mesh with its high heat release and heat absorption properties is adopted for the surface accommodating the back and hips.	MUGEN logo is embroidered on the back rest area. Red sticking is adopted to express our racing sprit.

Door mirror cover made of dry carbon, It is covered with UV clear coating which prevents the cover from deterioration. Comes with MUGEN logo

For all types (FF/4WD)

0.1h 76450-XLY-K0S0

Dynamically designed room mirror cover
Plated finish cover and painted cover are available, ABS
Available colors (MUGEN color code): Premium white pearl (PW) ·Alasbaster silver metallic (AS)·Milano red (MR)

For all types (FF/4WD)

Plated finish 

0.1h 76450-XKK-K0S0-MK

Painted 

0.1h 76450-XKK-K0S0-※※ (MUGEN color code)

Hair-line finished scuff plate with MUGEN logo
Design inspired by a checkered flag giving a sporty impression to the interior of the car 4pcs each of the front and rear plates as a set Two colors, black and red are available.

For all types (FF/4WD)

Black 

0.4h 84200-XMK-K0S0-BK

Red 

0.4h 84200-XMK-K0S0-RD