Please be noted that this page introduces the parts installable on the vehicles in Japan. We do not confirm if those parts are also installable on the vehicles sold in foreign countries.
Direct replacement for the OE front grille
Color: Dark Gray, Vacuum-formed PPE
H（FF/4WD）
H · F（FF/4WD）
H · L（FF/4WD）
13G · F（FF/4WD）
13G · L（FF/4WD）
15XL（FF/4WD）
On sale: End September, 2017
Color: Dark Gray
0.6h
75100-XMKB-K1S0
It is installed over the lower part of the bumper . It features a two-tone color finish composed of colored and matte-black paint. Material: Vacuum-formed PPE
A part of the bumper must be cut when the Front Under Spoiler is installed.
H（FF/4WD）
H · F（FF/4WD）
H · L（FF/4WD）
13G · F（FF/4WD）
13G · L（FF/4WD）
15XL（FF/4WD）
Two-tone color finish
0.6h
71110-XMKB-K1S0-＊＊
Unpainted
0.6h
71110-XMKB-K1S0-ZZ
To be attached on the bottom part of the OE side skirt (In case the side garnish is initially installed, replace it for the MUGEN side spoiler.), Two-toned (Body color × matte black), Vacuum-formed PPE, A set of right and left spoilers
For all types (FF/4WD)
Two-toned (Body color × matte black)
1.2h
70219-XMK-K0S0-＊＊
Unpainted
1.2h
70219-XMK-K0S0-ZZ
To be attached on the OE tail gate.
A set of the wing spoiler and the matte black tail gate cover is prepared for HYBRID.
Blow molding
ABS
H（FF/4WD） H · F (FF/4WD) H · L (FF/4WD)
Painted (3 colors※）
1.2h
84112-XMK-K1S0-＊＊
Unpainted
1.2h
84112-XMK-K1S0-ZZ
※ 3 Colors: Premium White PearlⅡ (PX), Crystal Black Pearl (CB), Brilliant Sporty Blue Metallic (BT)
13G · F (FF/4WD) 13G · L (FF/4WD) 15XL (FF/4WD)
Painted (3 colors※）
1.0h
84112-XMK-K0S0-＊＊
Unpainted
1.0h
84112-XMK-K0S0-ZZ
※ 3 Colors: Premium White PearlⅡ (PX), Crystal Black Pearl (CB), Brilliant Sporty Blue Metallic (BT)
This is installed onto the standard tailgate. It can be installed together with the Rear Under Spoiler and Wing Spoiler for a sportier and more stylish image.
For all types (FF/4WD)
On sale: End August, 2017
Color: Dark Gray
0.5h
74850-XMKB-K0S0
To be attached on the bottom part of the OE rear bumper
Optional LED rear fog light can be attachable.
Vacuum-formed PPE
A part of the bumper needs to be cut for installation.
H (FF/4WD)
H · F (FF/4WD)
H · L (FF/4WD)
13G · F (FF/4WD)
13G · L (FF/4WD)
15XL (FF/4WD)
Painted
1.0h
84111-XMKB-K1S0-＊＊
Unpainted
1.0h
84111-XMKB-K1S0-ZZ
LED rear fog light on
Vehicle not installed with the LED rear fog light
Switch
LED rear fog light can add an impression of racing car silhouette to the rear appearance and has high level of visibility even in bad weather. Comes with switch installable on instrument panel
The product can be installed on the MUGEN rear under spoiler installed initially.
1.5h
34400-XMKB-K1S0
The ventilated visor offers superior ventilation performance. With the case of the ordinary visors, when the side window is open even slightly, air emitted from the front opening flows upward along the window and re-enters the passenger compartment.
However, the MUGEN visor design has so unique configuration that it prevents the back flow and efficiently uses negative pressure to discharge air from the passenger compartment.
Furthermore, wind noise is significantly reduced compared to that generated by many other visor fitments, while at the same time rainwater is prevented from entering the passenger compartment; both factors that provide a substantial improvement in passenger comfort. Smoked acrylic, 2pcs each of the front and rear visors as a set, PAT
※Under the condition that the top part of the window is positioned higher than that of rubber blade
For all types (FF/4WD)
0.4h
72400-XMK-K0S0
●Type applicability mark： For all types = All types listed at right H = HYBRID H · F = HYBRID · F H · L = HYBRID · L Honda SENSING H · S = HYBRID · S Honda SENSING 13G · F = 13G · F 13G · L = 13G · L Honda SENSING 13G · S =13G · S Honda SENSING
