MUGEN

Please note; this assist meter is exclusively for use with RHD (Right-hand drive).
High precision additional meters incorporating water temperature gauge, oil temperature gauge, and an oil pressure gauge installed within a meter cowl designed exclusively for FIT. The shape and position of the cowling is designed and arranged so as to require minimum movement from the driver's line of sight. The color of illumination can be selectable, blue or red. The diameter of the meter is φ60. The assist meter comes with a sensor, a control unit, and a switch unit. Meter cowl is finished in matte black.

For all types (FF/4WD)

3.0h

78200-XMK-K0S0

[ Illumination ]

With the side lights and head lights switched on, the assist meters are illuminated. The color of the illumination is selectable blue, matching to the color of the OE meters, or sporty red.

 

[ Peak mode]

The peak value of each meter during vehicle running is indicated by the respective needle.

 

[ Warning mode ]

Whenever a reading from the engine sensors exceeds the user pre-set value, the warning LED in the panel board lights up (in case of oil pressure gauge, if the value is less than the set value, then the warning LED lights up). A useful replay mode in which each meter simultaneously records and reproduces the running condition for a maximum of 180 seconds is available.

Semi bucket seat satisfying both high holding performance
When developing a semi bucket seat two contradictory requirements need to be addressed, that of ergonomic drive support while at the same time providing driver comfort, including easy-access. MS-Z is specifically designed to reliably hold and support the shoulders, waist, and thighs and hardness of the urethane sections in each area is adjusted optimally. Special non-slip material was also chosen to protect driving posture while encountering strong G-force during cornering. The front surface of MS-Z is covered in Alcantara® Product passing the safety regulations
Alcantara® is a registered trademark of Alcantara S.p.A.

Specifications
Stepless recliner / Forward folding backrest / Lumbar support pad insertion type / Belt holes for safety harness / High grip side support / Long & deep seat cushion / Alcantara® / Shoulder grip / MUGEN Logo (embroidered) / Weight of the main body: 15kg

Seat main part

For all types (FF/4WD)

81100-XXG-K0S0

Not mountable on the vehicles with i-side air bag system for the front seat

For installation seat rails are required. RECARO seat rails (Driver's:2085.003.2 Passenger's:2085.003.1) can also be used.

 

Seat rail set
MS-Z, RECARO seat rail set

0.8h

[Driver's] 81300-XMK-K0S0-D

[Passenger's] 81300-XMK-K0S0-P

The ultimate full bucket seat satisfying both high holding performance and light weight properties. The main structure of the seat is the shell which is designed to hold the driver securely while enduring strong G-force during cornering, and also contributes to weigh saving. Form and thickness of the urethane are modified to fit each part of the body. The front surface of the seat is covered in Alcantara® which is known as a high durability material with a pleasant feel and texture. The seat completes with the FIA regulations applied in most renowned races including SUPER GT.
Alcantara® is a registered trademark of Alcantara S.p.A.

Specifications
Grass fiber shell / Belt holes for 3 inches full harness / Lumber support pad insertion type / Deep side support / Divided seat cushion / Non-slip seat cushion / Alcantara® / Shoulder grip / MUGEN logo (embroidered) / Main body weight: 6.6kg

Seat main part

On sale: End August, 2017

For all types (FF/4WD)

81100-XXF-K1S0

Not mountable on the vehicles with i-side air bag system for the front seat

For installation seat rails are required. RECARO seat rails (Driver''s:2085.003.2 Passenger's:2085.003.1) and side adopter (1700000J) can also be used.

 

Seat rail set
MS-R, RECARO seat rail and side adopter set

1.0h

[Driver's] 81500-XMK-K1S0-D

[Passenger's] 81500-XMK-K1S0-P

Door mirror cover made of dry carbon, It is covered with UV cut clear coating which prevents the cover from deterioration. Comes with MUGEN logo

For all types (FF/4WD)

0.1h

76450-XLY-K0S0

Dynamically designed room mirror cover
Plated finish cover and painted cover are available, ABS
Available colors (MUGEN color code): Premium white pearl (PW) ・Alasbaster silver metallic (AS)・Milano red (MR)

For all types (FF/4WD)

Chrome plated

0.1h

76450-XKK-K0S0-MK

 

Premium White Pearl painted

0.1h

76450-XKK-K0S0-PW

For all types (FF/4WD)

On sale: End February, 2018

Engine start/stop switch (for gasoline engine vehicles)

0.9h

35881-XMKB-K0S0

For all types (FF/4WD)

On sale: End February, 2018

Power switch (for hybrid vehicles)

0.9h

35881-XMKB-K1S0

The pedal base is made of aluminum and the pedal stopper for brake with a nickel-chrome blown metal non-slip surface. For AT

H（FF/4WD） H · F（FF/4WD） H · L（FF/4WD） 13G · F（FF/4WD）
13G · L（FF/4WD） 13G · S（FF/4WD） 15XL（FF/4WD）

0.3h

46545-XG8-K0S0

Hair-line finished scuff plate with MUGEN logo
Design inspired by a checkered flag giving a sporty impression to the interior of the car
4pcs each of the front and rear plates as a set
Two colors, black and red are available.

For all types (FF/4WD)

Black

0.4h

84200-XMK-K0S0-BK

Red

0.4h

84200-XMK-K0S0-RD