MUGEN

The Aero Bonnet optimizes the position of the air outlet in order to more efficiently discharge the heat produced by the engine. It is installed by removing the standard bonnet. Material: Unpainted GFRP

For all types (FF/4WD)

On sale: End August, 2017

1.0h

60100-XMKB-K0S0

Direct replacement for the OE front grille
Color: Dark Gray, Vacuum-formed PPE

H · S（FF/4WD） 13G · S（FF/4WD） RS

On sale: End September, 2017

Color: Dark Gray

0.6h

75100-XMKB-K0S0

This Front Aero Bumper is only for the HYBRID · S Honda SENSING, 13G · S Honda SENSING, and RS · Honda SENSING. It can be combined with the standard fog lights and Aero Illumination, or combined with the standard fog lights and optional MUGEN LED Fog Lights. It features a two-tone color finish composed of colored and matte-black paint. Either the MUGEN Front Sports Grille or standard grille can be installed at the same time. Material: Vacuum-formed PPE

H · S（FF/4WD） 13G · S（FF/4WD） RS

Two-tone color finish

0.6h

62511-XMKB-K0S0-＊＊

Unpainted

0.6h

62511-XMKB-K0S0-ZZ

This Front Under Spoiler is exclusive item for the HYBRID · S Honda SENSING, 13G · S Honda SENSING, and RS · Honda SENSING. It is installed over the lower part of the bumper and can be installed together with Aero Illumination. It features a two-tone color finish composed of colored and matte-black paint. Material: Vacuum-formed PPE
A part of the bumper must be cut when the Front Under Spoiler is installed

H · S（FF/4WD） 13G · S（FF/4WD） RS

Two-tone color finish

1.0h

71110-XMKB-K0S0-＊＊

Unpainted

1.0h

71110-XMKB-K0S0-ZZ

Advanced super luminosity LED fog light with a high level of visibility, low power consumption, long life, and is capable of giving an ideal light distribution owing to a combination of a high performance projector unit and a LED. Light color is white.
Attachment kit, sold separately, is required for installation.

33900-XG8-K0S0

LED Fog Light Attachment (For Front Aero Bumper)

This set contains the attachments and harnesses for mounting the LED fog lights. The light switch uses the standard fog light switch.
This attachment is not necessary when the standard fog lights are installed.

H · S（FF/4WD） 13G · S（FF/4WD） RS

0.6h

08V31-XMKB-K0S0

Aero illumination with a super luminosity bright white LED
Aero illumination is always activated whenever the ignition switch is in an “on” position. An optional part for MUGEN front aero bumper and front under spoiler.
Aero illumination itself cannot be “on” or “off” independently. The light color may look different depending on how it is viewed.

0.8h

33400-XMKB-K0S0

To be attached on the bottom part of the OE side skirt (In case the side garnish is initially installed, replace it for the MUGEN side spoiler.), Two-toned (Body color × matte black), Vacuum-formed PPE, A set of right and left spoilers

For all types (FF/4WD)

Two-toned (Body color × matte black)

1.2h

70219-XMK-K0S0-＊＊

Unpainted

1.2h

70219-XMK-K0S0-ZZ

Dry carbon upper wing to be attached on the OE tail gate
It is covered with UV cut clear coating which prevents the carbon from deterioration. Exclusive item for HYBRID · S Honda SENSING, 13G · S Honda SENSING, and RS · Honda SENSINGS. Comes with MUGEN logo

H · S（FF/4WD） 13G · S（FF/4WD） RS

1.0h

84112-XMK-K2S0

This is installed onto the standard tailgate. It can be installed together with the Rear Under Spoiler and Carbon Upper Wing for a sportier and more stylish image.

For all types (FF/4WD)

On sale: End August, 2017

Color: Dark Gray

0.5h

74850-XMKB-K0S0

To be attached on the bottom part of the OE rear bumper, Optional LED rear fog light can be attachable. Two-toned, Vacuum-formed PPE
A part of the bumper needs to be cut for installation.

H · S（FF/4WD） 13G · S（FF/4WD） RS

Two-toned (Colored × matte black)

1.0h

84111-XMKB-K0S0-＊＊

Unpainted

1.0h

84111-XMKB-K0S0-ZZ

LED rear fog light can add an impression of racing car silhouette to the rear appearance and has high level of visibility even in bad weather. Comes with switch installable on instrument panel
The product can be installed on the MUGEN rear under spoiler installed initially.

1.5h

34400-XMKB-K0S0

The ventilated visor offers superior ventilation performance. With the case of the ordinary visors, when the side window is open even slightly, air emitted from the front opening flows upward along the window and re-enters the passenger compartment.
However, the MUGEN visor design has so unique configuration that it prevents the back flow and efficiently uses negative pressure to discharge air from the passenger compartment.
Furthermore, wind noise is significantly reduced compared to that generated by many other visor fitments, while at the same time rainwater is prevented from entering the passenger compartment; both factors that provide a substantial improvement in passenger comfort. Smoked acrylic, 2pcs each of the front and rear visors as a set, PAT
※Under the condition that the top part of the window is positioned higher than that of rubber blade

For all types (FF/4WD)

0.4h

72400-XMK-K0S0