MUGEN

Aero bonnet equipped with air outlets to vent hot air from the engine
Direct replacement for the OE bonnet
GFRP, Unpainted
Recommended color for air outlet panel: Matt Black

0.5h 60100-XLR-K0S0

Direct replacement for the OE grille
Red Honda H emblem needs to be removed from the OE grille and reused on the MUGEN grille.
Grille comes complete with MUGEN emblem as well.
GFRP, Unpainted
Recommended color: Night Hawk Black Pearl (B92P)

0.6h 75100-XLR-K0S0

Front aero bumper equipped with air intake ducts for brake cooling
Direct replacement for the OE bumper
OE fog lights can be used. Where the air intake garnish sold separately is installed, the OE fog light needs to be removed.
GFRP, Unpainted
Recommended colors: Air intake duct and lower part of bumper / Night Hawk Black Pearl (B92P)

Bumper fitment requires modification to fender mole, fender cover, and bulkhead lower cover.

1.2h 62511-XLR-K0S0

Air intake garnish* conducts fresh air directly into the Hi-performance air cleaner & box.
Requires removal of OE fog lights for installation
Garnish can be installed on either OE bumper or MUGEN front aero bumper.
GFRP, Unpainted
A set of right and left garnishes
Recommended color: Night Hawk Black Pearl (B92P)

OE Light switch needs to be replaced for a lighting switch without fog light (35255-SNA-J01) for installation.
*Left hand side only

0.7h 71140-XLR-K0S0

Front aero fenders equipped with air outlets to vent hot air efficiently from the engine
Direct replacement for OE front fenders
GFRP, Unpainted

2.0h 60200-XLR-K0S0

Direct replacement for OE front fender arches for wider stance - requires modification to inner wheel arch cover panel.
GFRP, Unpainted

A set of right and left wheel arches

“For OE bumper”

2.0h 74100-XLR-K0S0

“ For MUGEN Aero Bumper”

2.0h 74100-XLR-K1S0

Direct replacement for the OE bumper
OE reflectors should be reused.
Finisher rings are all stainless steel.
GFRP, Unpainted
Recommended colors:
Centre of the bumper - Matt Black
Lower part of the bumper - Night Hawk Black Pearl (B92P)

Bumper fitment requires modification to fender mole.

0.8h 84111-XLR-K1S0

Fit in place of the OE tail gate spoiler
Wing base: GFRP, Unpainted
Wing blade: Blow formed ABS, colored by Night Hawk Black Pearl (B92P)

0.5h 84112-XLR-K0S0