MUGEN

Semi bucket seat satisfying both high holding performance and lightweight properties
When developing a semi bucket seat two contradictory requirements need to be addressed that of ergonomic drive support while at the same time providing driver comfort, including easy-access. MS-Z is specifically designed to reliably hold and support the shoulders, waist, and thighs and hardness of the urethane sections in each area is adjusted optimally. Special non-slip material was also chosen to protect driving posture while encountering strong G-force during cornering. The front area of MS-Z is covered in Alcantara ®
Alcantara® is a registered trademark of Alcantara S.p.A.

Specifications
Stepless recliner / Forward folding backrest / Lumber support pad insertion type / Belt holes for safety harness / High grip side support / Long & deep seat cushion / Alcantara® / Shoulder grip / MUGEN logo (embroidered) / Main body weight: 15.0kg

For all types Not mountable on the vehicles with i-side air bag system for the front seat

[Seat main part] For installation RECARO seat rails are required.

81100-XXG-K0S0

[Seat rail set] A set of MS-Z and RECARO seat rail
Certified by Japanese safety standard

0.8h [R side] 81300-XLT-K0S0-D
[L side] 81300-XLT-K0S0-P

Combination with the RECARO seat rails above can also be certificated by Japanese safety standard. Seat rails above are not available through M-TEC.

MUGEN colors are highlighted on the shoulder grips. Special non-slip material was chosen to protect the driver from slippage.	MUGEN logo is embroidered on the back rest area. Red sticking is adopted to express our racing sprit.
Alcantara® was chosen to protect the drive from slippage during cornering. Punched mesh also provides high hear release and heat absorption properties.

The ultimate full bucket seat satisfying both high holding performance and light weight properties
The main structure of the seat is the shell which is designed to hold the driver securely while enduring strong G-force during cornering, and also contributes to weigh saving. Form and thickness of the urethane are modified to fit each part of the body. The front area of the seat is covered in Alcantara® which is known as a high durability material with a pleasant feel and texture. The seat completes with the FIA regulations applied in most renowned races including SUPER GT.
Alcantara® is a registered trademark of Alcantara S.p.A.

Specifications
Carbon fiber shell / Belt holes for 3 inches full harness / Lumber support pad insertion type / Deep side support / Divided seat cushion / Non-slip seat cushion / Alcantara® / Shoulder grip / MUGEN logo (embroidered) / Main body weight: 6.5kg

For all types Not mountable on the vehicles with i-side air bag system for the front seat

[Seat main part] For installation RECARO seat rails and a side adapter are required.

81100-XXF-K0S0

[Seat rail set]A set of MS-R and RECARO seat rail and side adapter
Certified by Japanese safety standard

1.0h [R side] 81500-XLT-K0S0-D
[L side] 81500-XLT-K0S0-P

Combination with the RECARO seat rails and side adapter above can also be certified by Japanese safety standard. Seat rails and side adapter above are not available though M-TEC.

MUGEN colors are highlighted on the shoulder grips. Special non-slip material was chosen to protect the driver from slippage.	Form and thickness of the urethane are modified to fit each part of the body, which maximizes contact area and in the end leads to high driver-support performance and fatigue reduction effect.
Alcantara® was chosen to protect the drive from slippage during cornering. Punched mesh also provides high hear release and heat absorption properties.	MUGEN logo is embroidered on the back rest area. Red sticking is adopted to express our racing sprit.

Please be noted that this assist meters is exclusively for RHD (Right-hand drivce) vehicles.

Water temperature and oil temperature meters are all contained in the meter cowl exclusively designed for CR-Z. The shape and position of the cowling is designed and arranged so as not to obscure the driver’s line of sight, but at the same time to be easily viewed while driving. Meter diameter is φ60mm
A set of sensors, special harnesses, and a control unit
Meter cowl is painted matte black.

For all types

3.0h 78200-XLT-K1S0

[Illumination] When the side lights and head lights are turned on, the figures and scales in the panel board are illuminated in Green and the needles are illuminated in Red

[Peak mode] The peak value of each meter during vehicle running is indicated by the respective needle

[Warning mode] Whenever a reading from the engine sensors exceeds the user pre-set value, the warning LED in the panel board lights up (in case of oil pressure gauge, if the value is less than the set value, then the warning LED lights up). A useful replay mode in which each meter simultaneously records and reproduces the running condition for a maximum of 40 seconds is available.

Aluminium spherical shift knob covered with dry carbon
Its size (ø50) and weight were determined considering driver's shift work.
Two colors, red and black are available.

α（6MT） α･Master label（6MT）

0.1h [RED] 54102-XLT-K1S0-RD
[BLACK] 54102-XLT-K1S0-BK

High grade machined spherical shift knob
Material: Aluminium
Diameter: ø50mm
Shift pattern: Laser etched

α（6MT） α･Master label（6MT）

0.1h 54102-XLT-K0S0

Dynamically designed dry carbon room mirror cover with printed MUGEN logo
Dry carbon was chosen to give a sporty impression. Comes with MUGEN logo

For all types

0.2h 76450-XLT-K0S0